Sliger CX3701, 3U 15in NAS Rackmount Server Case – 3.5″ Bays

379,00 €

3U 15in, SFX PSU, ITX Motherboard, 10x 3.5″ and 4×2.5″ drive Support

5 in stock

SKU: CX3701 Category: Server Cases

Description
Additional information

Description

Sliger CX3701 3U rackmount chassis with 15″ depth

10x trayless 3.5″ HDD mounts with hot-swap/direct-wired SATA connectors
4x internal 2.5″ SSD mounts for cache and boot drives
2x 120mm fans for silent airflow

NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.

Specifications

Motherboard support	Mini-ITX, Deep Mini-ITX (170mm x 170 mm) [ 6.7″ x 6.7″ ] NOTE: Motherboard mounting tray can be slid out of case to simplify assembly and maintenance
CPU Liquid Cooling	support for 1x 92mm liquid cooler (Asetek 645LT) with 120mm to 92mm optional adapter ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible.
CPU Air Coolers	up to 110mm tall Recommended Silent Air Coolers: Noctua D9L, Noctua NH-L12
Fan Mounting	Rear Fan: 1x 120mm fan, up to 38mm thick Side Fan: Single Slot PCIe Card, 1x 120mm x 25mm fan or Dual-Slot PCIe Card, 15mm thick fan recommended Fan brackets are baffled for venting to reduce noise levels and improve airflow
GPU / PCIe Cards	2x full height PCIe card slot cutouts Maximum card height: 115mm Maximum card length: 185mm If using a dual slot PCIe card, such as GPU, you must use a slim (15mm thick) 120mm fan on the side vent
Storage	Ten (10) 3.5 Hard Drive Disks Case includes 10x SATA/SAS SFF-8482 male to SATA female adapters (preinstalled in case) 4x shoulder screws attached to 3.5″ HDDs These shoulder screws guide HDDs through slot and align the drive to a backplane mounted SATA to SATA adapter User must connect SATA data and power cables on inside of case to these SATA to SATA adapters Hot-swap support can depend on your HBA/RAID card, motherboard, and OS Case has a locking mechanism and key, as well as thumb screws, to secure drives Case also includes tow (2) SATA power distribution cables (1x SATA power male to 5x SATA power female) Case does NOT include any data cables Four (4) 2.5″ SSD/HDD mounting points (behind power button and USB front panel area)
Power Supply	SFX or SFX-L
Front Panel I/O	2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header
Material and Finish	galvanized steel + aluminium, powder coating
Case Dimensions (DxWxH)	378mm x 432mm x 132.5 mm
Compatible Rack Rails	Sliger PM-Series Ball Bearing Slides CX Rails Installation Manual General Devices C300-S Series GD Rails Installation Manual
Rev Control	9/2023 – 1.0 Initial release
Scope of delivery	Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors
Documents and build recommendations	coming soon

Additional information

Weight	11 kg
Dimensions	54 × 49 × 24 cm

What are you looking for?