Description
Sliger CX3172a XL 3U rackmount chassis with 17″ depth and 5.25in bay
- support for SSI-EEB, SSI-CEB, eATX, and XL ATX motherboards up to 13″ in depth
- 5x PCIe slot cutouts for PCIe cards and GPUs up to 115mm tall
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- liquid cooling support for 240mm AIOs with up to 4x 120mm fans in push/pull
- up to 110mm tall CPU air coolers
- ATX power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | XL-ATX (325mm x 330mm)
SSI-EEB (305mm x 330mm) EATX (305mm x 267mm) SSI-CEB (305mm x 267mm) ATX (305mm x 244 mm)
MicroATX (245 x 245mm) FlexATX (229 x 191 mm) Mini-DTX (203mm x 170 mm) Mini-ITX (170mm x 170 mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 240mm liquid cooler
or 2x 120mm liquid coolers (AIOs on left fan and right fan position, middle fan is air only) A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible. Third party AIO cooler compatibility can be checked against dimension drawing on this page. |
| CPU Air Coolers | up to 110mm tall
Recommended Silent Air Coolers: Noctua NH-D9L |
| Fan Mounting | Front:
up to 2x 120mm x 25mm fans (available separately) Includes one(1) washable / reusable dust filter |
| GPU / PCIe Cards | Five(5) full height PCIe card slot cutouts
NOTE: Compatibility for GPUs with integrated AIO liquid coolers is limited by case height |
| Storage | One(1) 5.25″ bay with removable filler blank
Two(2) 2.5″ SSD up to 15mm thick
One(1) 2.5″ SSD under 5.25″ bay One(1) 5.25″ bay filler blank provides mounting for two(2) 2.5″ SSD and one(1) 3.5″ HDD Sliger recommends use of M.2/NVMe and PCIe based storage on motherboard |
| Power Supply | high wattage ATX or FSP Twins redundant power supplies
|
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 433mm x 432mm x 132.5mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 01.11.2024 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
