Description
Sliger CX4712 4U rackmount chassis with 25″ depth
- support for SSI-CEB, EATX, ATX, and Micro-ATX motherboards
- 10x trayless 3.5″ HDD mounts with hot-swap/direct-wired SATA connectors
- 4x internal 2.5″ SSD mounts for cache and boot drives
- 8x full-height PCIe card slots
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- supports up to 3x 120mm fans (available separately)
- Liquid cooling support for 360mm, 240mm or 2x 120mm AIOs
- up to 158mm tall CPU air coolers
- ATX power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | SSI-CEB (L x W: 305 x 267mm) EATX (L x W: 305 x 280mm) ATX (L x W: 305 x 244mm) Micro-ATX (L x W: 245 x 245mm) Flex-ATX (L x W: 229 x 191mm) Mini-DTX (L x W: 203 x 170mm) Mini-ITX (L x W: 170 x 170mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 360mm liquid coolers or 1x 240mm liquid cooler or 3x 120mm liquid coolers A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible. |
| CPU Air Coolers | up to 158mm tall
Recommended Silent Air Coolers: Noctua NH-D12L recommended |
| Fan Mounting | Mid-chassis mounted:
up to 3x 120mm x 38mm fans (available separately) Fan bracket can be removed with no tools to allow easy access to fan screws |
| GPU / PCIe Cards | 8x full height PCIe card slot cutouts
LIQUID COOLING NOTE: radiators reduce the available depth inside the case for long GPUs
|
| Storage | Ten(10) 3.5″ Hard Drive Disks
Four(4) 2.5″ SSD/HDD mounting points (behind power button and USB front panel area) |
| Power Supply | ATX
|
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 632mm x 432mm x 176,75mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 18.04.2022 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
