Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
Sliger CX3702, 3U 18in NAS Rackmount Server Case - 3.5" Bays, Micro ATX
 

Sliger CX3702, 3U 18in NAS Rackmount Server Case – 3.5″ Bays, Micro ATX

419,22 €

3U 18in, SFX PSU, Micro-ATX Motherboard, 10x 3.5″ and 4×2.5″ drive Support

Out of stock

Out of stock

SKU: CX3702 Categories: , , Brand:
 

Description

Sliger CX3702 3U rackmount chassis with 18″ depth and Micro ATX motherboard support

  • Micro-ATX motherboard with four slot cutouts for PCIe cards; GPU, NIC, HBA/RAID
  • Magnetically attached front panel, locking mechanism for retaining HDDs
  • 10x trayless 3.5″ SATA or SAS HDD mounts via captive SFF-8482 adapters
  • 4x internal 2.5″ SSD mounts for cache and boot drives
  • Mounting for up to two(2) 120mm exhaust fans, washable front dust filter
  • Mounting for 120mm AIO
  • SFX or SFX-L power supply

NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.

Specifications

Motherboard support Mini-ITX (170mm × 170 mm) [6.7″ × 6.7″]

Micro-ATX (244mm x 244mm) [9.6″ x 9.6″]

Deep Mini-ITX (170mm x 209mm) [6.7″ x 8.2″]

NOTE: Motherboard mounting tray can be slid out of case to simplify assembly and maintenance
CPU Liquid Cooling
  • support for 1x 92mm liquid cooler (Asetek 645LT) with 120mm to 92mm optional adapter
  • 1x 120mm liquid cooler (Asetek 650LKS) 27mm thick or smaller

ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible.
CPU Air Coolers up to 110mm tall

Recommended Silent Air Coolers:

Noctua D9L, Noctua NH-L12
Fan Mounting
  • Rear Fan: 1x 120mm fan, up to 38mm thick
  • Side Fan: 1 x 120mm fan, up to 25mm thick

Fan brackets are baffled for venting to reduce noise levels and improve airflow
GPU / PCIe Cards
  • 4x full height PCIe card slot cutouts
  • Maximum card height: 115mm

ENSURE CLEARANCE FOR 12-pin 12VHPWR / CEM5 POWER CONNECTOR

  • Maximum card length: 245mm
  • If using a dual slot PCIe card, such as GPU, you must use a slim (15mm thick) 120mm fan on the side vent
Storage
  • Ten (10) 3.5 Hard Drive Disks
  • Case includes 10x SATA/SAS SFF-8482 male to SATA female adapters (preinstalled in case)
  • 4x shoulder screws attached to 3.5″ HDDs
  • These shoulder screws guide HDDs through slot and align the drive to a backplane mounted SATA to SATA adapter
  • User must connect SATA data and power cables on inside of case to these SATA to SATA adapters
  • Hot-swap support can depend on your HBA/RAID card, motherboard, and OS
  • Case has a locking mechanism and key, as well as thumb screws, to secure drives
  • Case also includes tow (2) SATA power distribution cables (1x SATA power male to 5x SATA power female)
  • Case does NOT include any data cables
  • Four (4) 2.5″ SSD/HDD mounting points (behind power button and USB front panel area)
Power Supply SFX or SFX-L
Front Panel I/O 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header
Material and Finish galvanized steel + aluminium, powder coating
Case Dimensions (DxWxH) 454mm x 432mm x 132.5mm
Compatible Rack Rails Sliger PM-Series Ball Bearing Slides

CX Rails Installation Manual

General Devices C300-S Series

GD Rails Installation Manual
Rev Control 8/2024 – 1.0 Initial release
Scope of delivery Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors, 2x SATA power distribution cables
Documents and build recommendations coming soon

Additional information

Weight 11 kg
Dimensions 54 × 49 × 24 cm

You may also like…

Related products