Description
Sliger CX4200f 4U rackmount chassis with 20″ depth and 3x 5.25in bays
- support for SSI-CEB, EATX, ATX, Flex-ATX, and Micro-ATX motherboards
- Three(3) 5.25″ bays for hot-swap and removable media devices, two(2) internal 2.5″ SSD mount
- 8x full-height PCIe card slots
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- supports up to 2x 120mm fans (available separately)
- Liquid cooling support for 240mm or 2x 120mm AIOs
- up to 153mm tall CPU air coolers
- ATX power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | SSI-EEB (L x W: 305 x 330mm) SSI-CEB (L x W: 305 x 267mm) EATX (L x W: 305 x 280mm) ATX (L x W: 305 x 244mm) Micro-ATX (L x W: 245 x 245mm) Flex-ATX (L x W: 229 x 191mm) Mini-DTX (L x W: 203 x 170mm) Mini-ITX (L x W: 170 x 170mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 240mm liquid cooler
or 2x 120mm liquid coolers A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible. |
| CPU Air Coolers | up to 153mm tall
Recommended Silent Air Coolers: |
| Fan Mounting | Front:
up to 2x 120mm x 25mm fans (available separately) Includes one(1) washable / reusable dust filter Rear: Optional bracket for one(1) 120mm fan over motherboard IO shield Optional bracket for one(1) 120mm fan blowing down onto PCIe cards |
| GPU / PCIe Cards | Eight(8) full height PCIe card slot cutouts
NOTE: Compatibility for GPUs with integrated AIO liquid coolers is limited by case height |
| Storage | Case is designed for use of M.2 storage on motherboard or via PCIe M.2 RAID cards
Each 5.25″ bay filler blanks provides mounting for 2x 2.5″ SSD and 1x 3.5″ HDD
Max of 2x 3.5″ HDD and 4x 2.5″ SSD when not using any 5.25″ devices |
| Power Supply | ATX
|
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 509mm x 432mm x 176,75mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 01.11.2024 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
