Description
Sliger CX3171i XL 3U rackmount chassis with 17″ depth, PCIe 4.0 riser for large GPU and 5.25in bay
- support for SSI-EEB, SSI-CEB, eATX, and XL ATX motherboards up to 13″ in depth
- One(1) PCIe 4.0 riser for one(1) 3.5-slot GPU
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- liquid cooling support for 240mm AIOs with up to 2x 120mm fans
- up to 110mm tall CPU air coolers
- One(1) 5.25″ bay for hot-swap and removable media devices, two(2) internal 2.5″ SSD mount
- SFX/SFX-L power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | XL-ATX (325mm x 330mm) SSI-EEB (305mm x 330mm) eATX (305mm x 267mm) SSI-CEB (305mm x 267mm) ATX (L x W: 305 x 244mm) Micro-ATX (L x W: 245 x 245mm) Flex-ATX (L x W: 229 x 191mm) Mini-DTX (L x W: 203 x 170mm) Mini-ITX (L x W: 170 x 170mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 240mm liquid cooler
or 1x 120mm liquid cooler A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible. Third party AIO cooler compatibility can be checked against dimension drawing on this product page. |
| CPU Air Coolers | up to 110mm tall
Recommended Silent Air Coolers: Noctua NH-D9L |
| Fan Mounting | Front:
Rear:
Includes one(1) washable / reusable dust filter |
| GPU / PCIe Cards | Three(3) horizontal slot cutouts with one PCIe 4.0 16x riser for large 3-slot GPU
One(1) full height PCIe card slot cutout
|
| Storage | One(1) 5.25″ bay with removable filler blank
One(1) 2.5″ SSD up to 15mm thick
One(1) 2.5″ SSD under 5.25″ bay One(1) 5.25″ bay filler blank provides mounting for two(2) 2.5″ SSD and one(1) 3.5″ HDD Sliger recommends use of M.2/NVMe and PCIe based storage on motherboard when possible |
| Power Supply | SFX or SFX-L |
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 433mm x 432mm x 132.5mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 01.11.2024 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
