Sliger CX2177x, 2U 17in Rackmount Server Case – 3.5in Cage, EEB/EATX/CEB/ATX and FlexATX PSU Support

285,00 €

2U 17in, FlexATX PSU, EEB/EATX/CEB/ATX Motherboard, 3.5in HDD Support

Out of stock

Out of stock

SKU: CX2177x Category: Tags: ,
 

Description

Sliger CX2177x 2U rackmount chassis with 17″ depth for EEB/EATX/CEB/ATX motherboard and 3.5in HDD mount

  • Supports SSI-EEB or eATX (up to 13″ deep) motherboards
  • 7x Half-Height Full-Length (2U HHFL) PCIe cards and GPUs
  • 2x USB 3.0 type A front I/O
  • supports up to 3x 80mm fans and 2U CPU air coolers up to 66mm tall
  • Internal storage for up to four(4) 3.5″ HDD, twelve(12) 2.5″ SSD, or a mix of both
  • FlexATX form factor power supply support

NOTE: CPU coolers and fans are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.

Specifications

Motherboard support SSI-EEB (305mm x 330mm)

SSI-CEB (305mm x 267mm)

EATX (up to 325mm x 330mm)

ATX (305mm × 244 mm)

MicroATX (245 x 245mm)

FlexATX (229 × 191 mm)

Mini-DTX (203mm × 170 mm)

Mini-ITX (170mm × 170 mm)
CPU Air Coolers up to 66mm tall

NOTE: 60mm or taller “Top Down Coolers” are NOT recommended. IE Noctua L65 or L12S coolers. Recommended 2U flow-through server CPU coolers like Dynatron 2U A47 or similar.
Fan Mounting Front:

up to 3x 80mm fans up to 38mm thick (available separately)

Case includes washable / reusable UL94 open-cell reticulated dust filter
GPU / PCIe Cards 7x Half Height Full Length(HHFL) PCIe slot cutouts

Cards may be referred to as 2U height, low-profile, or MD1/MD2/MD3 form factor

Half height vented slot covers are provided with case

Max Height: 72mm from PCIe finger tab to lid of case

Max Length with 25mm fans: 276mm – including power connectors

Max Length with 38mm fan: 263mm – including power connector
Storage Up to four(4) internal 3.5″ HDD mounts

  • Front drive cage allows for mounting of two(2) 3.5″ drives – up to 25mm thick
  • Rear drive cage allows for mounting of two(2) 3.5″ drives – up to 20mm thick

Up to twelve(12) internal 2.5″ SSD mounts

  • One(1) SSDs mount above 3.5″ drives – up to 15mm thick
  • One(1) SSDs mount below 3.5″ drives – limited to 7mm thick
  • Up to seven(7) 2.5″ SSDs may be installed in front drive cage when no 3.5″ HDDs are present – limited to 7mm thick
  • Up to five(5) 2.5″ SSDs may be installed in rear drive cage when no 3.5″ HDDs are present – limited to 7mm thick

Sliger recommends use of M.2/NVMe and PCIe based storage on motherboard when possible
Power Supply FlexATX form factor

  • Max length: 250mm
Front Panel I/O 2x USB 3.0 Type A to 19-Pin Motherboard Header
Material and Finish galvanized steel + aluminium, powder coating
Case Dimensions (DxWxH) 331,5mm x 432mm x 88mm

Depth from front rack post is 328mm
Compatible Rack Rails Sliger PM-Series Ball Bearing Slides

CX Rails Installation Manual

General Devices C300-S Series

GD Rails Installation Manual
Rev Control 01.10.2024 – 1.0 Initial release
Scope of delivery Computer case, mounting hardware, 2x USB 3.0 type A front I/O connectors, dust filter
Documents and build recommendations coming soon

More details can be found on manufacturer’s website.

Additional information

Weight 7 kg
Dimensions 52,07 × 41,91 × 19,5 cm

Related products