Description
Sliger CX2177a 2U rackmount chassis with 17″ depth for EEB/EATX/CEB/ATX motherboard
- Supports SSI-EEB or eATX (up to 13″ deep) motherboards
- 7x Half-Height Full-Length (2U HHFL) PCIe cards and GPUs
- 2x USB 3.0 type A front I/O
- supports up to 4x 80mm fans and 2U CPU air coolers up to 66mm tall
- Internal storage for up to two(2) 3.5″ HDD, seven(7) 2.5″ SSD, or a mix of both
- FlexATX form factor power supply support
NOTE: CPU coolers and fans are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | SSI-EEB (305mm x 330mm)
SSI-CEB (305mm x 267mm) EATX (up to 325mm x 330mm) ATX (305mm × 244 mm) MicroATX (245 x 245mm) FlexATX (229 × 191 mm) Mini-DTX (203mm × 170 mm) Mini-ITX (170mm × 170 mm) |
| CPU Air Coolers | up to 66mm tall
NOTE: 60mm or taller “Top Down Coolers” are NOT recommended. IE Noctua L65 or L12S coolers. Recommended 2U flow-through server CPU coolers like Dynatron 2U A47 or similar. |
| Fan Mounting | Front:
up to 4x 80mm fans up to 38mm thick (available separately) Case includes washable / reusable UL94 open-cell reticulated dust filter |
| GPU / PCIe Cards | 7x Half Height Full Length(HHFL) PCIe slot cutouts
Cards may be referred to as 2U height, low-profile, or MD1/MD2/MD3 form factor Half height vented slot covers are provided with case Max Height: 72mm from PCIe finger tab to lid of case Max Length with 25mm fans: 276mm – including power connectors Max Length with 38mm fan: 263mm – including power connector |
| Storage | Internal mounting bracket with configuration options for:
Two(2) single or dual-platter 3.5″ HDD
One(1) full-sized 3.5″ HDD, and one(1) 2.5″ SSD up to 15mm thick
Sliger recommends use of M.2/NVMe and PCIe based storage on motherboard when possible |
| Power Supply | FlexATX form factor
|
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 331,5mm x 432mm x 88mm
Depth from front rack post is 328mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 01.10.2024 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A front I/O connectors, dust filter |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
