Description
Sliger CX2130c 2U rackmount chassis with 13″ depth for Micro-ATX motherboard and 3.5in ICYDOCK bays
- support for Micro-ATX and Deep Micro-ATX motherboards
- 5x Half-Height Full-Length (2U HHFL) PCIe cards and GPUs
- 2x USB 3.0 type A front I/O
- supports up to 3x 80mm fans and 2U CPU air coolers up to 66mm tall
- Configurable storage via two(2) front access 3.5″ adapter bays, and two(2) internal 2.5″ SSD
- SFX or SFX-L form factor power supply support
NOTE: CPU coolers and fans are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | Deep MicroATX (265 x 267 mm)
MicroATX (245 x 245mm) FlexATX (229 x 191 mm) Mini-DTX (203mm x 170 mm) Deep Mini-ITX (170 x 209 mm) Mini-ITX (170mm x 170 mm) |
| CPU Air Coolers | up to 66mm tall
NOTE: 60mm or taller “Top Down Coolers” are NOT recommended. IE Noctua L65 or L12S coolers. Recommended 2U flow-through server CPU coolers like Dynatron 2U A47 or similar. |
| Fan Mounting | Front:
up to 3x 80mm fans up to 38mm thick (available separately) Case includes washable / reusable UL94 open-cell reticulated dust filter |
| GPU / PCIe Cards | 5x Half Height Full Length(HHFL) PCIe slot cutouts
Cards may be referred to as 2U height, low-profile, or MD1/MD2/MD3 form factor Half height vented slot covers are provided with case Max Height: 72mm from PCIe finger tab to lid of case Max Length with 25mm fans: 276mm – including power connectors Max Length with 38mm fan: 263mm – including power connector |
| Storage | Two(2) front accessible 3.5″ adapter bays for IcyDock or CRU storage devices
Up to two(2) internal 2.5″ SSD
Sliger recommends use of M.2/NVMe and PCIe based storage on motherboard when possible |
| Power Supply | SFX or SFX-L form factor |
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 331,5mm x 432mm x 88mm
Depth from front rack post is 328mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 01.10.2024 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A front I/O connectors, dust filter |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
